Arduino Case - Free 3D Print Model

Search models, users, collections, and posts

Kazikk

Education>Engineering

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.6mm nozzle, 0.3mm layer, 2 walls, 15% infill

Designer

41 min

1 plate

4.9(77)

0.2mm layer, 2 walls, 15% infill

49 min

1 plate

4.7(80)

Open in Bambu Studio

Boost

695

1607

171

3.3 k

2 k

Released

Description

Slim Arduino Uno Case

Overview:

-This sleek, two-part case is specifically designed to house and protect an Arduino Uno. It's compact and streamlined, ensuring your Arduino remains secure and accessible.

Assembly Instructions:

- Required Hardware: A single 3m screw and a 3m hexagonal nut.
- Screw Holes Design: Screw hole features a solid layer to ensure overhangs print with precision and durability. Remove after printng!

Key Features:

- Slim Profile: Minimizes space without compromising on protection.
- Durable Construction: Ensures your Arduino Uno is safe from dust and damage.
- User-Friendly Design: Simple to assemble and easy to open when required.

Support and Feedback:

If you like the design, you can buy me a coffee here: https://www.buymeacoffee.com/kazikg

Encountered any issues or have suggestions? Feel free to leave a comment below. I'm here to assist and continuously improve this design. Your feedback is invaluable! :)

Comment & Rating (171)

@user_3416192467

Perfect! My Arduino is well-protected and I can connect the prototype shield

(Edited)

Show original

@Mimihomedeco

Print Profile

0.2mm layer, 2 walls, 15% infill

super and very protective for my test card.

Show original

@mr.lockyer

Boosted

delighted with it!

@user_3201029948

Print Profile

0.6mm nozzle, 0.3mm layer, 2 walls, 15% infill

Absolutely great! Very minimalist. Top notch! Highly recommend!

Show original

@user_3251645653

Print Profile

0.2mm layer, 2 walls, 15% infill

it attaches well to the arduino, but the type of connection that requires a bolt to keep the container always closed is inconvenient

Show original

@Karau_Herdon

Print Profile

0.6mm nozzle, 0.3mm layer, 2 walls, 15% infill

Fits perfectly to protect the parts in black PLA

Show original

@user_1323532005

Very nice box! I had to use M2.5 hardware, which worked perfectly for me.

@Dyriten

Print Profile

0.2mm layer, 2 walls, 15% infill

It fits my arduino uno perfectlty but the hole for the m3 nut is way too small for my nut. Had to spend alot of time making it bigger without breaking it. Also you didnt specify how long screw you needed so all of my screws were the wrong lenght so I had to cut a few millimeters off of my m3 16mm screw to make it not stick out of the bottom.