Baby Einstein Jumper Tower Ring

Baby Einstein makes great products. Their baby jumpers (aka. Activity Jumpers) have one flaw, the tower mounted rings for hanging toys from. Inevitably you'll find that they get bent and ultimately break off. This is a simple ring for attaching things to in order to replace that part. 

I had a difficult time removing the existing broken one from the removable snap in retention machanism they have, but after using a knife to cut the sides of the num that holds it in place, I was able to get it out. 

If you use Fusion, you will find that I developed it as 3 sepearate pieces initially, then combined them in the end. This should allow you to step back once or twice in the timeline if you wish to change the simple ring I put on it with something larger or different all together. You will need potentially need to redo the edge fillet I put on it since it needed to be blended in with the lower piece.

I printed this in PLA since it's relatively flexible and durable.