A Study in Black and White #153

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.97697mm

Filaments Used:
    #1c1c1c PLA+ Numakers Midnight Gray  Transmission Distance: 0.2
    #52595d PLA+ Numakers Dark Grey  Transmission Distance: 0.5
    #747474 PLA+ Numakers Simply Silver  Transmission Distance: 0.5
    #8c969d PLA+ Numakers Light Gray  Transmission Distance: 0.7
    #e6baa8 PLA+ Numakers Apricot  Transmission Distance: 4.7
    #e6d2b5 PLA+ Numakers Ivory White  Transmission Distance: 4
    #f1ece1 PLA+ Numakers Pure White  Transmission Distance: 3.3
    #ffffff PLA+ Numakers Cool White  Transmission Distance: 1.8
This print uses 8 unique filaments

Swap Instructions:
    Start with Midnight Gray
    At layer #17 (0.8mm) swap to Dark Grey
    At layer #20 (0.92mm) swap to Simply Silver
    At layer #24 (1.08mm) swap to Light Gray
    At layer #26 (1.16mm) swap to Apricot
    At layer #30 (1.32mm) swap to Ivory White
    At layer #32 (1.4mm) swap to Pure White
    At layer #40 (1.72mm) swap to Cool White for the rest.