Green Dragon HueForge with frame

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.44mm

Filaments Used:
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #6d0640 PLA BambuLab Matte Plum  Transmission Distance: 1.3
    #156945 PLA BambuLab Basic Green  Transmission Distance: 2
    #cedd00 PLA BambuLab Basic Bright Green  Transmission Distance: 3.8
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #6 (0.56mm) swap to Plum
    At layer #7 (0.64mm) swap to Green
    At layer #9 (0.8mm) swap to Bright Green
    At layer #13 (1.12mm) swap to Jade White for the rest.