M134 Minigun - Magnetic Mount V1 PROP, replica

M128 inspired minigun - V1. THIS IS A NON-FUNCTIONAL PROP/REPLICA

Magnetic Mounted

Items required for the build: 

• 5x M4x8mm bolts
  • Use these to attach Lid to Main_Body
• 13x M4x16mm bolts
  • Use these to attach the following
    • Arm to Main_Body (at least 4x)
    • Side_Cylinder to Main_Body (2x)
    • Turret_Head to Barrels (7x)
• 4x 60x15.5x5mm neodymium bar magnets. Use the provided screws to screw into the mounting bodies. 
  • 3x go on the Arm
  • 1x goes on the Belt_Base

These parts can be found on Amazon at the following links: 

• Magnets: https://www.amazon.com/dp/B0B3X78GFH?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
• M4 Bolts: VGBUY 500Pcs M4 Screw Kit, Black M4 Screws (7 Sizes 6-30mm), Assorted Metric Nuts and Bolts Assortment Kit, Hex Socket Head Cap 6/8/12/16/20/25/30mm with Washer Nuts, 12.9 Grade: Amazon.com: Industrial & Scientific

I have made a number of print profiles for PLA, PETG, and a heavy duty PETG. Select the proper one accordingly for your use case. Give the Turret_Head an orange tip if your laws require it. It would be wise to do this especially if the print is at all on display in a public area for whatever reason. 

Disclaimer: These magnets are NOT strong enough to hold the printed minigun under dynamics or high wind. DO NOT operate your vehicle with this mounted on your vehicle. This is for display ONLY. It is the responsibility of the printer to know the laws in his/her area. Use common sense with this print. I as the designer am in no way responsible for how this used or for any damage that may come to vehicles or persons because of it.

UPDATE - 7/18/25: 

• Due to the overwhelming response, I have published a PLA and PETG print profile of a modified Magnetic_Arm. Rather than housing only 3 bar magents, these HEAVYDUTY arms house 6 magnets. Do with this information as you please.