Raspberry Pi Zero Case
Print Profile(4)
Bill of Materials
Description
Raspberry Pi Zero / 2W Case
The Zero and the 2W fit into the case. The Raspi is placed in the bottom part and screwed together with the lid. This requires [4 x M2.5 nuts] and [4 x countersunk screws M2.5x12 for V*.12 - variants or 4 x countersunk screws M2.5x16 for V*.16 - variants]. On the side there are openings for the Mini-HDMI and Micro-USB sockets, as well as for the Micro SD card and the camera connection.
The different variants V1.12 / V1.16 / V2.12 / V2.16 can be selected in the print profiles.
For the V*.12 variants, the case has a very low height, so there is no space for a heatsink between the CPU and the case (approx. 4mm)!
For the V*.16 variants, the case has a distance between the CPU and the casing of (approx. 8mm), which is perfectly suitable for heatsinks!
The variants can be selected in the print profiles! The bottom part is the same for all variants!!!
- V1.12 → Lid with pattern (4x M2.5 nut) (4x M2.5 x 12 countersunk screw)
- V1.16 → Lid with pattern (4x M2.5 nut) (4x M2.5 x 16 countersunk screw)
- V2.12 → Opening for pin header in lid (4x M2.5 nut) (4x M2.5 x 12 countersunk screw)
- V2.16 → Opening for pin header in lid (4x M2.5 nut) (4x M2.5 x 16 countersunk screw)
Boost Me (for free)
Thank you!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)