Lucario Pokemon Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 112.52x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.08mm

Filaments Used:
    #000000 PLA BambuLab Matte Charcoal  Transmission Distance: 0.6
    #00358e PLA BambuLab Basic Blue  Transmission Distance: 4
    #0086d6 PLA BambuLab Basic Cyan  Transmission Distance: 3.5
    #00b1b7 PLA BambuLab Basic Turquoise  Transmission Distance: 1.4
    #e2dedb PLA PolyLite White  Transmission Distance: 5
    #cd007b PLA BambuLab Basic Magenta  Transmission Distance: 3
This print uses 6 unique filaments

Swap Instructions:
    Start with Charcoal
    At layer #7 (0.64mm) swap to Blue
    At layer #9 (0.8mm) swap to Cyan
    At layer #14 (1.2mm) swap to Turquoise
    At layer #17 (1.44mm) swap to White
    At layer #24 (2mm) swap to Magenta for the rest.