Bambu Studio Infill Patters

This is yet another set of infill patterns. I wanted to just try to use all capabilities of the slicer / studio rather than using an app for the design. So the attached m3f is created with Bambu Slicer and design of the case etc. is all done in Studio.

This is printed in ABS for the simple reason I liked the colour combination, but I am sure it can be printed in anything you want (maybe not so much TPU - never tried though).

I did make some changes in terms of speed etc. - but that is because I printed this with a 0.4mm nozzle and I wanted to get the writing ok ish.

So basically what you see here is printed with 0.4mm nozzle and adjusted speeds (95mm/s across all levels and 10mm/s for bridges / overhangs).

The Process Settings this is coming with is based on 0.08mm and settings are based on ABS (Bambu brand) so obviously feel free to play with the settings.