Search models, users, collections, and posts
Ovonic 6S 1300mAh LiPo Case - Bando Proof
IP Report
Print Profile(2)
Generic PETG - 0.2mm layer height
Designer
1.5 h
1 plate
Polycarbonat (PC) - 0.2mm layer height
Designer
1.5 h
1 plate
Open in Bambu Studio
Boost
11
22
1
0
19
8
Released
Description
Tired of destroying your lipos? Protect them with this bando-proof case!
Installation
The model is split up into two parts. This way all corners can be protected.
A heat shrink is required in order for the two halves to stay in position.
I recommend a heat shrink made from polyolefin. PVC heat shrink (which is the one on the lipos by default) is stiff and brittle and will just tear open upon impact on concrete.
Weight
For the Ovonic 6S 1300mAh LiPo. Printed in Polycarbonat (PC):
- Case alone: 20g
- Case + heat shrink: 33.5g
- Lipo without the case: 210.9g
- Lipo with the case and heat shrink: 244.4g
Please Note
The case is durable and stiff. Please keep in mind the swelling of the batteries - especially if you don't treat them very well. I recommend removing the case and/or replacing it with a slightly larger version if you notice swelling in your batteries.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (1)