Hanger clip for trousers, snack clip, universal spring clip, recommended to print with PETG

I already have some hangers and trouser clips at home, but sometimes they are not enough. I wanted to design a clip that could be attached to a hanger,

to turn a hanger into a trouser clip, so I wouldn't need to buy more trouser clips and it wouldn't take up extra space. I looked on Maker World but couldn't find an ideal model that solved my problem,

so I decided to design one myself. Isn't this the fun of 3D printing, being able to customize production according to your own needs.

I needed this clip to be able to hang on a hanger. My home's hanger rod is about 10mm, so the hole in the middle of the clip I designed needed to be larger than 10mm,

The clip needed teeth to increase friction, but the teeth couldn't be too large or too deep to prevent deep marks on clothes.

Of course, this clip can also be used daily for snack bags, papers, and so on,

Using PETG, the elasticity is very good.

0.2mm layer height, three walls, 20% spiral infill,

Two versions are provided, 8mm and 12mm high. The 8mm uses less material, the 12mm feels better.

When assembling, a little glue is needed (at the blue marked spots in the following image). I used 401 craft glue. Don't apply too much, to prevent the clip opening from getting stuck.

Well then, happy printing! If you like it, download it now,

If this helps you, please boost me.