Amiga-Style Mini ITX Case - Free 3D Print Model

Search models, users, collections, and posts

whatskenmaking

Hobby & DIY>Electronics

IP Report

Print Profile(1)

All

P1S

P1P

H2D

X1 Carbon

X1E

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

11.6 h

5 plates

5.0(1)

Open in Bambu Studio

Boost

Released

Description

This is a Mini ITX case that I designed in the style of an Amiga 1000. This case features an interchangeable face plate, as well as an interchangeable rear panel. I created this to hold my OtterX, so I've included an OtterX rear plate, as well as an OtterX-branded face plate. Along with that, I've included a blank face plate that you can use or modify.

This case was featured in my YouTube video on the OtterX:

Required Parts:

Four (4) M3 x 8mm Countersunk Screws - Used for attaching the lid
Four (4) M3 x 6mm Countersunk Screws - Used for attaching the feet
Rubber Feet - Not required, but highly recommended
16mm Case Button - I use this one: https://www.amazon.com/dp/B09W9J4QSL

Comment & Rating (4)

@leclairaaron

Print Profile

0.2mm layer, 2 walls, 15% infill

I used the pre-sliced profile for the faceplate, the supports came off super easy and clean, unfortunately I used PLA and the clips snapped very easily. The rest was printed in Polymaker ABS and should work great for an 8700G build.

@user_2134689023

I love this case .. have you thought about building or providing a blank ( full ) back plate ? Thinking to print one for a Raspberry pi4 or an Amd mitx board.