P365 Raider Holster Velcro Panel

This is a flat panel meant to add Velcro to the Flux holster for the Flux Raider P365 without modification to the holster itself. It is designed to work with the hardware that comes with the Flux holster. My holster came with 3 sets of screws and nuts. I added a 4th hole because it looked right to me, and you can add another screw if you want. You could also cut off the bottom part of the panel and use the center hole as the 3rd mounting point. You do you. 

You will obviously need to add your own Velcro. I recommend copying the pattern as seen in the photos of the longer version. The Velcro I applied to the shorter version I thought was overkill.  I printed in ABS for my final product, because I don't want it to deform if I forget the bag in my car. I have multiple holsters, and will be leaving this one in the bag, but not leaving the gun in the bag.

I originally designed this to fit inside the shadow of the holster (short version), but I found that the holster tended to tip outward from the body when drawing in my particular bag application. The standard (long version) is now my preference, as it keeps the Raider grip in a much better position for me. Both models are available ready to print, and in .step format. The bag in the photos is the Eberlestock Fade Sling. 

Please comment with any questions, comments, or constructive criticism you may have.