Eledain Statue - Dragonbane (Fan-Made, Magnetized)

This 3D model recreates the four-part Eledain statuette from the Dragonbane adventure campaign, based on the illustration in the core book (see reference image). The assembled model stands approximately 30cm tall and includes embedded 6x2mm magnets (12 in total) for a modular, snap-together experience. 

Note: The magnetic snap is subtle due to the relatively weak pull of the 6x2mm magnets, but it's sufficient to keep the pieces together when resting on a table. If you prefer a stronger connection, consider using larger magnets and adjusting the model by replacing the existing magnet voids with larger negative cylinders to suit.

Printing Notes:

• Magnet-ready files include pause points for inserting 6x2mm magnets - check your slicer to confirm placement.
• Recommended layer height is 0.08mm for magnet fit accuracy. Variable layer height may also work as long as magnet layers are at 0.08mm.
• If printing without magnets, you can optimise the print orientation to reduce supports or improve finish quality.
• The model has a weathered, worn stone look by design. The face isn’t highly detailed, and there are a few minor imperfections.

Files included:

• A single-piece, uncut version (no magnets)
• A split, magnet-ready version with 5 parts
• Each part labelled with magnet counts for easy assembly