Modular Mounting Kit - Shoe Splitter - Grip

Modular Mounting Kit - Shoe Splitter - Grip 

A modular hot shoe splitter system designed for use with cold shoe accessories. The splitters are available in three widths, the measurement refers to the distance between the mounted shoes:

• 60 mm
• 80 mm
• 100 mm

The print is oriented so that the transferred force and load run along the layer lines. This ensures the parts are rigid, durable, and the risk of cracking is minimized. Five wall lines provide sufficient strength.

There are several configuration options:

• Dual splitter (symmetric) – mounts one cold shoe to the left and one to the right of the center.

• Dual splitter (offset) – mounts one cold shoe directly above the original hot shoe and one offset to the side.

• Triple splitter – adds two cold shoes on both sides, with the middle one aligned directly above the hot shoe.

• Vertical post splitter – a vertical adapter that branches into two rotated cold shoes: one 90° to the left and one 90° to the right (horizontal orientation).

All components are secured using the included plastic nut. 

Additionally, the system includes a handle that can be mounted in any shoe slot. 

The parts can be combined freely to build custom rigs based on your setup and shooting needs.

These are cold shoe adapters – they do not transmit any signals or power and are intended for use with passive accessories only (e.g., microphones, lights, monitors).