Filip Honzárek

cover

Google_Home_Mini_Wall_Mount_56f969bc-bf07-450a-98c6-ab2c74e8d38d.png

2023-09-22_pfrqq51lm66t.jpg

plate_1.png

bitflung

PXL_20231005_201827111.MP.webp

PXL_20231005_201407212.MP.webp

<ul><li>Adaptive layer height</li><li>Ironing on all top layers</li><li>nice smooth result, prints in about half an hour</li><li>Slide a home mini into the bracket after screwing it to the wall; the fit is snug and robust</li></ul>Overall I&#39;m very happy with the result. Thanks for sharing the model!

0.16mm layer, 2 walls, 15% infill

BjörnB

20250106_221926.jpg

20250106_221935.jpg

First print was printed from the app, with default profile. It broke when i tried to mount the Google nest mini in it. When i got home i decided to make a STRONG profile. Use any filament… i used Bambu lab PLA basic. Here&#39;s what i did: Changed:  * ORIENTATION!* layer height to 0.2* Initial layer width: 0.42* Seam position to BACK (looks better, and does not give any weak corners) * Increased walls to 3 * Infill changed to 10% gyroid * Top and bottom surface patterns to Monotonic, 0.8 mm each. Removed:  “only one wall on top” Added: BRIM - remove it if you know you have good bed adhesion. I Added filament changes at 3 mm from bottom, and 3 mm from top on the pictures.

Modified for STRENGHT and quality - read info

surrehue

IMG_0883_a7adf0c0-7e0f-4d92-906c-184b291e479d.webp

plate_1.webp

A1 mini, 0.2mm layer, 2 walls, 15% infill

Tellervo

20241015_203419.jpg

Screenshot 2024-10-16 091725.png

Print profile that prints on the edge of the holder to improve strength. I used a command strip.&nbsp;

Print on edge 0.16mm layer, 2 walls, 15% infill

kenkennif

PXL_20241229_155754863.jpg

PXL_20241229_155745634.jpg

Wall mount for Google Home Mini. You can use two screws or tape.<h3>Print instructions</h3><ul><li>PLA</li><li>Infill 15%</li></ul>For people from Czech republic, you can order whole set here:<a target="_blank" href="https://www.acomp.cz/chytra-domacnost/b-safe-google-home-mini-wall-mount-bily.html" rel="nofollow noopener">https://www.acomp.cz/chytra-domacnost/b-safe-google-home-mini-wall-mount-bily.html</a><boostme><boosttitle>Boost Me</boosttitle><boostcontent>Please consider leaving a review, like and Boost! And of course remember to share this with your friends! Thank you for the support!</boostcontent></boostme>

Google Nest Home Mini Wall Mount

YDesign

PXL_20240416_095439262_35c4c995-ec57-466e-912f-c6211fa1eafa.jpg

PXL_20240416_095456154_19f633bf-ea5e-47cb-8580-b06af048e296.jpg

PXL_20240416_095858705_2b013041-6d1a-470f-9ac0-94b5a5bfbcad.jpg

PXL_20240416_095904878_106435fe-ad03-4e5a-9447-cf120917a8ab.jpg

HSW Google Nest Mini Mount

ASIA

Print Profile(5)

Description

Print instructions

Comment & Rating (357)

License

Remixes (1)

Related Models