Print Profile(1)
Description
This hardware allows you to mount IKEA FÄRGEK mirrors when the adhesive mount is not strong enough to hold the mirror with your wall type. To use, simply print 3 of the pieces labeled holder and use the model labeled as guide to help mark holes.
Make sure to use screws with a flat head that fit in the hole so that the screw is flush with the hardware. If it is not flush the mirror will not fit.
It is also recommended to use a screwdriver instead of a drill to prevent over-tightening or breaking the holder. Do not over-tighten the screws or you may find it difficult to get the mirror in place. Having a small amount of movement allows the mirror to move the holder to the angle that it needs to be to fit.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)