Cat Window Protection Grid
Print Profile(2)
Description
Cat Window Protection Grid
Protective window grid for cats – designed to secure the gaps that appear when the window is tilted open.
The grid includes holes that allow it to be screwed onto the window using M3 screws. However, I recommend using strong 3M tape instead to avoid damaging the window by drilling.
The grid consists of 3 parts that are connected with M4x12 screws and nuts.
Note: The model includes a design for M4x12 screws. If you want to use them, make sure to print them using a stronger material. PLA screws may break easily due to their small size. For stability, metal screws are recommended.
Grid dimensions:
128 x 502 x 11 mm
Accessories recommended for installation:
- Strong 3M tape or M3 screws
- M4x12 screws with nuts for connecting the parts
Recommended print settings:
- Layer height: 0.2 mm
- Elephant foot compensation: 0.15 mm
- Infill: 30%
For screw and nuts:
- Layer height: 0.12mm
- Speed: 80 mm/s
Infill: 100%
Boost Me (for free)
If you like my designs, boost me!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (12)