Multiboard Needle Files/Small Screwdrivers holder

Simple Needle file or Screwdriver holder using snaps for multiboard. Is rigid even when grabbing or adding files/screw drivers. While I did function fit this for the needle files I've already printed a couple others for some smaller/thinner screw drivers. 

The Screwdrivers “shaft” and Needle files “blade” can be up to 6mm diameter and up to 12mm in two directions (an eclipse). Meaning it can hold elongated or rectangular files as shown. In short this design is ment to accommodate all types of Needle files not just circular but rectangular or eclipse. 

Two versions
12mm holes (Red in photos) - Can fit Screwdrivers / Needle files with a starting handle diameter of 12mm or less
14mm holes (Green in photos) - Can fit Screwdrivers / Needle files with a starting handle diameter of 14mm or less

Looking for a holder for different sized screw driver set or a combination of sizes? Look here → (coming soon)

Note these use the snaps of a multiboard so you need to have snaps installed on your multiboard. I used Raised Double-Sided snap but any snap with multiboard will work tested with various including flush.

I have stl and 3mf because both are popular. Feel free to remix just please follow multiboards license and attribute me if you used my models in your remix. 

If you used them please leave a like. If you notice any error please tell me so I can correct them. Happy Printing!

NOTE this is a multiboard item remix and as such will strictly follow - https://www.multiboard.io/license.