Search models, users, collections, and posts
Key Organizer slim
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
41 min
2 plates
Open in Bambu Studio
Boost
52
146
5
4
122
70
Released
Bill of Materials
Maker's Supply Kits and Parts
Select all
Description
Boost Me (for free)
Thank You!!!
Boost Me (for free)
Thank You!!!
If you want to carry your keys without a big tangle, I recommend this key organizer.
In this version you can insert more than 6 keys, you just need to recover 2 screws and 2 bolts of 4 mm,
Instead in the FULL version, you can also print the screw with the bolt.
Instructions:
The assembly is very simple:
1: insert the 4 mm nuts into the appropriate slots;
2: take the other part of the key ring and insert the 4 mm bolt;
3: alternate a key and a washer (I made 6 sizes of washers ranging from 0.5 mm to 3 mm)
in order to fit all the keys,
I also made a special spacer to be able to put a ring or a hook;
4: screw the bolt and tighten it until the keys are well fixed but not too much because they must be able to rotate.
6: Enjoy your new keychain
If you want to insert more than 6 keys, you will need to insert a longer bolt
Boost Me (for free)
Thank You!!!
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)