Print Profile(2)
Description
Baby Groot Can Holder
Fits long EU cans with a capacity of 0.5L. You can also use my insert for 12oz cans (link below),
but in this short model, it's my 10mm riser probably enough to fit a 12oz Can.
Recommended print settings: PLA, 0.2mm layers, 2-3walls, 8-10%gyroid, Tree supports (at least 25°)
Just use my profile.
Here is the link to my model of the insert that you can use in 0.5L holders with your 12oz cans, and 10mm riser if you want better access to the top. Both are scalable, so you can make them smaller or larger in your slicer.
https://makerworld.com/cs/models/1499777-can-holder-riser-insert-scalable#profileId-1568806
Happy printing:)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (45)