Texture Rollers for Wargaming - Free 3D Print Model

Search models, users, collections, and posts

VoyForges

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(1)

All

A1 mini

H2D

P1S

X1 Carbon

P1P

X1E

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.12mm layer, 3 walls, 15% infill

13.4 h

6 plates

4.5(24)

Open in Bambu Studio

Boost

385

1399

991

532

Released

Description

Here are 5 (so far) texture rollers for your wargaming board. I plan to make more textures, but so far you get:

Cobblestone
Cracked dry earth
Decorative wall stone
Long Bricks for walls
Wooden Planks

Print the rollers on a resin printer to get the best quality of your textures. I tested these on an FDM printer and they look fine, so if you decide to go with an FDM printer, print the rollers in a vertical position.

The rollers come with a handle. Print the handle flat on an FDM machine. Use 0.28 layer hight to speed things up, and 20% infill. Place supports below „hinges” that hold the roller and you’re done.

You can place the roller on a handle quite easily due to the spring action of the handle.

UPDATES:

- 07.02.2023: added 2 new rollers, one for long bricks that can be used for walls, and one for wooden planks. The wooden planks one isn't too deep nor detailed, but still I add it because someone may find it useful.

texture rollers

Comment & Rating (28)

@vkmicro

Print Profile

0.12mm layer, 3 walls, 15% infill

The roller is awesome but the handle does not fit

(Edited)

@dagget

Odd, I used the STL with the preset settings for my P1S. Unfortunately, the roller does not fit on the handle. Did I perhaps misunderstand something

Show original

@vkmicro

Same issue...

@Ldc2335

Print Profile

0.12mm layer, 3 walls, 15% infill

Had to sand the handle for the rollers to fit. Not a huge deal. Thanks for the design!

@Prelude45879

Cool! I am planning to make one for my D&D dice tower

@user_414274159

Print Profile

0.12mm layer, 3 walls, 15% infill

printed fine but the hole for the handle to fit in needed sanding etc to for

@madmarvellous

Print Profile

0.12mm layer, 3 walls, 15% infill

rollers are great but handle doesn't fit rollers

@KatyDid

Print Profile

0.12mm layer, 3 walls, 15% infill

the handle doesn’t fit into the roller. But the roller is great!

@user_3769902143

Print Profile

0.12mm layer, 3 walls, 15% infill

cylinder diameter to hold rollers are too big without sanding. rollers themselves are great

@Pokerop

my handle doesnt fit inside of the rollers? am I doing something wrong?

@user_3565460256

Print Profile

0.12mm layer, 3 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.