LEGO Track Riser
Print Profile(1)
Description
A perfect combination of a son who loves LEGO trains and a father who loves 3D printing.
Track Introduction: Each loop consists of 16 curved tracks + 6 straight tracks, totaling 22 tracks. Every two tracks are elevated by 10mm, totaling 110mm of elevation. Therefore, the first layer is the most complex, requiring 11 different types of risers with heights of 10mm, 20mm, 30mm...110mm. I have set the modules to: 10, 20, 50, 80, and also a 5mm small module for fine-tuning. Each module consists of two columns and one beam.
The risers on the second and subsequent layers are simpler; simply arranging the 110mm risers in a spiral upward will do.
Video introduction, please click the link:【LEGO Track Riser】https://www.bilibili.com/video/BV14aNkzFEwB/?share_source=copy_web&vd_source=62c40bdfcda47b44be98a3de15c42dd8
Now, let's begin the quiz:
1. For only one layer, how many risers are needed? Answer: 11 are needed.
2. For a two-layer track, how many 110mm risers are needed? Answer: 11 110mm risers are needed.
3. If you want the train to go up and then spiral down, how many risers are needed? Answer: Double the number of risers!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (15)