Cat Wall Shelf (180mm x 350mm) A1 Mini friendly - Free 3D Print Model

Search models, users, collections, and posts

El_Nino

Household>Pets

IP Report

Print Profile(3)

All

A1 mini

P1S

P1P

X2D

X1 Carbon

H2D

X1E

H2D Pro

H2C

H2S

P2S

A2L

V2 better tolerance .15 vs .1, vertical print, no support

Designer

11.4 h

2 plates

4.9(16)

0.2mm layer, 2 walls, 15% infill

Designer

8.9 h

2 plates

4.7(7)

vertical print for NO SUPPORT 0.2mm layer 2 walls 15% infill

Designer

9.8 h

2 plates

4.6(5)

Open in Bambu Studio

Boost

771

2287

1.1 k

446

Released

Description

UPDATED: V2 added with better tolerance and vertical print with no support.

05-2026 - It's been over a year now, my kitten is now a 12lb cat and the shelf is still holding up fine, I've moved the shelves to the garage walls to incorporate a larger cat play area (carpeted walls, etc.).

Simple wall shelf for cats, recommend printing vertical to avoid support / potential issues, or horizontal to increase strength if needed. I am new at designing and not an engineer by any means so if there are improvements to be made, please let me know (using small words lol).

350mm x 180mm split for A1 Mini about 186g for each plate (2 total)

Also made a smaller “step” as an in between

Cat Wall Shelf Step by El_Nino MakerWorld: Download Free 3D Models

Comment & Rating (38)

@honza1922

Print Profile

0.2mm layer, 2 walls, 15% infill

no cat 😆👌

@kechu

Print Profile

0.2mm layer, 2 walls, 15% infill

printed this 30 cm big and still looks great!

@user_766474459

Print Profile

V2 better tolerance .15 vs .1, vertical print, no support

I don't have cats but I used it for my coffee corner and it was just what I needed. Thank you very much

Show original

@MrMister

Boosted

I printed V2, a little bigger. Absolutely great 👍 no problems during assembly. Another print, again a bit bigger, is already running

Show original

@Imho_3D

Print Profile

0.2mm layer, 2 walls, 15% infill

The shelves are sturdy and hold up well. Thank you.

@abellserpens

Greetings, great design. Do you think this can hold 4 and 5kg cats? I have 8 cats

The designer has replied

Show original

@user_1333242520

i have not load tested anything other than my cat who is 12 lbs. now and jump on/off just fine

@staticshadow40

Replying to @user_1333242520 :

One of my cats is almost double that so I shudder to think of how fast he would destroy something like this.

@Akras

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_2994250249

I can’t see why supports are needed for the version printed laying flat on the bed. Those small holes don’t need support, even if the slicer thinks it does. It’s barely an overhang.

The designer has replied

@user_1333242520

it's the dovetail connectors that require it

@Kurando

Print Profile

0.2mm layer, 2 walls, 15% infill

I do not recommend printing it vertically. For some reason, the layers detach when you put it together. I tried again afterwards and it happened again. Then I tried horizontally again and everything was fine

Show original

@Chinait

same here

@JohnMeidanis

Print Profile

vertical print for NO SUPPORT 0.2mm layer 2 walls 15% infill

the missing star is for the extremly tight tolernce. i use a malet to connect the two shelfs together

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.