Polymaker Education

cover

IMG_0645.JPEG

IMG_0644.JPEG

IMG_0643.JPEG

IMG_0641.JPEG

IMG_0647.JPEG

IMG_0646.JPEG

IMG_0642.JPEG

IMG_0627.JPEG

Screenshot 2025-06-23 130433.png

Front Panel- Color

plate_1.png

Top Panel

plate_2.png

Door- Color

plate_3.png

Back Panel

plate_4.png

Top Panel- Color

plate_5.png

Insert

plate_6.png

Tray- Metallic 

plate_7.png

Bottom- Metallic

plate_8.png

Screws (9) - Metallic

plate_9.png

Knobs (2)- Metallic

plate_10.png

Corners (4)- Metallic

plate_11.png

Front Door Knob - Metallic

plate_12.png

2025-06-19_6b21a694b86c78.jpeg

<ul><li>Start with a clean build plate</li><li>No supports needed, you can use an outer brim on the tall corner pieces if you like for extra insurance </li><li>Monitor first layer</li><li>Print Screws, Knob and Corner pieces with a smaller layer height (0.1-0.15mm) for a more accurate fit. </li></ul>

Standard Toy Profile

Front Panel

Door

Side Panel 1

Side Panel 2

Oven Rack

Bottom

Screws and Corners (0.1 Layer Height)

Control Knobs

Oven Door Handle

Intrepid 3D Prints

1000012976.jpg

1000012977.jpg

1000012978.jpg

Everything except the corners and screws use a 0.2mm layer height, screws and corners have 0.1mm layer height. 2 walls, 15% Gyroid infill. Fixed the screw holes in the corners and because they were somehow backwards (just like the hot plate model). Fixed in TinkerCAD. Added a brim to the corners because they have fallen over on me 4-5 times when printing. I recommend using a CoreXY type printer (X1/P1/H2) as opposed to an A1 series bed slinger to keep the corners from falling over. I also manually set the corners to be at 50% but I had to switch my P1P to “Silent” with a print time of 12 hours to get them printed without falling over.

Corrected Screw Holes & Gyroid Infill

2x Side Panel 2

Dominik

PXL_20260305_072158845.jpg

PXL_20260305_072207777.jpg

PXL_20260305_072222493.jpg

PXL_20260305_072346592.jpg

Folgende Änderungen sind eingearbeitet:<ol><li>Knöpfe haben Temperatur und Backofensymbole erhalten (größere Version als auf dem Bild ersichtlich) - Platte 2</li><li>Front hat zusätzliche Leuchte erhalten für “eingeschalteten&#34; Zustand - Platte 1</li><li>Türgriff umkontruiert und mit richtigem Gewinde ausgestattet - Platte 3</li><li>Backblech (https://makerworld.com/de/models/1462759-baking-sheet-for-play-kitchen) wurde für den Ofen angepasst - Platte 4</li><li>Topcover wurde mit Klickverbindung (https://makerworld.com/de/models/610562-universal-round-wall-mount-updated?from=search#profileId-537472) versehen, damit es unter dem Tisch montiert werden kann. </li></ol>

The following changes have been incorporated:<ol><li>Knobs have received temperature and oven symbols (larger version than shown in the picture) - Plate 2</li><li>Front has received an additional light for “switched on” state - Plate 1</li><li>Door handle re-engineered and equipped with correct thread - Plate 3</li><li>Baking tray (https://makerworld.com/de/models/1462759-baking-sheet-for-play-kitchen) was adapted for the oven - Plate 4</li><li>Top cover was provided with a click connection (https://makerworld.com/de/models/610562-universal-round-wall-mount-updated?from=search#profileId-537472) so that it can be mounted under the table. </li></ol>

Oven knobs, baking tray, table mount

This is NOT A SOLID PRINT- it will not take nearly as much filament as you might expect and is the perfect addition to your pretend play kitchen. All parts are pre-plated and painted in the 3MF provided. &nbsp;Be sure to print the Screws/Corner pieces in a smaller (0.1 - 0.15 mm) profile for a cleaner print and better fit.&nbsp;There is a built-in ring of support inside of the oven door where the knob screw goes- photo above.&nbsp;The baking sheet to fit this oven is included in the file. &nbsp;Check out the rest of our Pretend Play Kitchen stuff <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/collections/1471167-pretend-play-food">here!</a>&nbsp;Filament colors used in photo- Panchroma Matte in Mint Green PLA, Panchroma PLA in Translucent Grey and Panchroma PLA in Grey.

Pretend Play Oven

ASIA

Print Profile(3)

Description

Comment & Rating (3)

License

Related Models