Poop box right side Remixed by 3DaFull

Remixed by

3DaFull

3D Printer>3D Printer Accessories

Print Profile(1)

All

P1P

P1S

X1 Carbon

X1E

0.2mm layer, 3 walls, 10% infill gyroid

Designer

2.5 h

1 plate

4.8(33)

Boost

217

127

Released

Description

Se ha realizado un remix (https://www.printables.com/es/model/349514-bambulabs-logo-poop-bin-6mm-magnets), por la necesidad de que la caja de cacas fuera hacia la derecha. Se ha respetado la zona de entrada de cacas pero se ha ampliado hacia la derecha. Se le ha dado en el interior un angulo de caida para mejor aprovechamiento del espacio de cacas.
La adhesión a la parte trasera metalica de la impresora la he realizado con una lámina fina de imán.

Actualización a 29/11/2023, 1er archivo .3mf:
Parte superior mejorada para evitar el cambio de color debido al flujo.
Se han modificado los perímetros y el relleno.

A remix (https://www.printables.com/es/model/349514-bambulabs-logo-poop-bin-6mm-magnets) has been made, because of the need for the poop box to be to the right. The poop inlet area has been respected but has been enlarged to the right. It has been given in the interior an angle of fall for better use of the poop space.
The adhesion to the metal back of the printer has been made with a thin sheet of magnet.

Update as of 29/NOv/2023 1st file .3mf:
Improved top to avoid color change due to flow.
Perimeters and backfill are modified.

Comment & Rating (41)

@lukaszlukasz

Print Profile

0.2mm layer, 3 walls, 10% infill gyroid

at the end it's not perfect but acceptable

@hoodean

Print Profile

0.2mm layer, 3 walls, 10% infill gyroid

not sure but the last 15% printed strangely, but the rest was magnificent

@SkyDawgie

Print Profile

0.2mm layer, 3 walls, 10% infill gyroid

Works great! Just wish it was taller throughout and that it didn't have the bottom incline... just a waste of filament IMO.

The designer has replied

@3DaFull

Thank you! You have the XL version in my profile. The inclination is to help distribute the poop. Thank you again.

@dairavain

Print Profile

0.2mm layer, 3 walls, 10% infill gyroid

very good STL file, started from my phone with default settings. ran on sport mode at 225°C nozzle temp, 55°C bed temp, ambient temp 35-36°C. came out great!

The designer has replied

@3DaFull

Thank you for your comment ! I am pleased that the design works well. Good 3d prints