0,5L / 473 cm³ Can dispenser (A1 Mini Ready!) - Free 3D Print Model

Search models, users, collections, and posts

Matt_XT600

Household>Other House Models

IP Report

GIF

Print Profile(1)

All

A1 mini

X1E

P1P

H2S

H2D

H2C

P1S

X1 Carbon

H2D Pro

P2S

X2D

A2L

0.2mm layer, 2 walls, 20% infill

Designer

15 h

5 plates

4.9(45)

Open in Bambu Studio

Boost

433

1503

144

1.2 k

520

Released

Bill of Materials

Bambu Filaments

Select all

White (33100) / Filament with spool / 1 kg

PETG HF

Description

22.07.2025 Improved - the new model v3 out now!
I have improved my 0.5 l / 473fcc can dispenser model again.
The joints are new. Their shape has been changed, and the tolerances are also tighter. Easier and safer to glue. It provides a cleaner look on the sides. And the last but not the last; This allows the model to be printed on the Bambu Lab A1 Mini and other small printers. (Yes, that's right, 10 can dispensers printable on the A1 Mini :) )

Boost Me (for free)

Dear A1 Mini User, if you celebrate that you can print it now, please give me a boot for free.

To assemble the V3, glue the sides first. The four large connectors are marked with letters (A, B, C, and D), which you can find on the can dispenser. Add some shims at the front and back to keep the construction straight. The joints are 0.6mm high, so you'll need to put some spacer on the left and right sides. Perhaps a small coin or a few pages from a magazine. Just make sure it's straight. This is easy to see by the middle bars; they need to be parallel. The tolerances have been changed so that superglue could also work. However, due to the brittle properties of CA, I still recommend 5-minute epoxy.

The new print profile is now online. Enjoy!

05.07.2025 Improved - the new model v2 out now!
I've improved my 0.5 l can dispenser model and moved the top bar back 40mm, like my 0.33 l can dispenser. This ensures more comfortable can removal.
The new print profile is now online. Enjoy!

It's a can dispenser for the refrigerator. It holds a total of 10 0.5L cans, the kind commonly used in Europe for soda, energy drinks, and beer. Automatically pushes the next can to the front. The model comes on four plates and must be glued together. I chose the bonding tolerances to allow for a bit more play to compensate for printing inaccuracies and provide enough space for the adhesive. It's therefore designed for 5-minute epoxy, so superglue (CA) is unsuitable. The model is designed so that you finish gluing the side panels first and then join the left and right halves together.

I printed PETG with the Bambu Lab A1. Without any problems.

If you are looking for a design for 0.33l EU cans, I have made a new version based on this model specifically for 0.33 liter EU cans.

https://makerworld.com/de/models/1538975-0-33l-can-dispenser-10-x-0-33l-eu-cans#profileId-1614838

Here's a photo provided to me by User_2615938075. It shows the design with the Argentinian 473 cc can. It also works well.

Have fun printing.

Comment & Rating (144)

@user_2560055414

Boosted

Many heartfelt thanks for the opportunity to print this fantastic model on the A1 mini Everything printed perfectly and assembly was straightforward

The designer has replied

Show original

@Matt_XT600

The A1 Mini prints exceptionally cleanly Greetings

Show original

@Matt_XT600

Fun Fact: A rather rare device is visible in the background of your photos, the same one that appears in the background of one of my photos XD

Show original

@user_2560055414

Boosted

Replying to @Matt_XT600 :

This item belongs in every well-appointed home 😂😂😂

Show original

@user_2615938075

Boosted

Excellent!! Printed in Hellbot brand blue PLA Works perfectly with 473 cm3 Argentine cans Thank you!!!

The designer has replied

Show original

@Matt_XT600

That's wonderful! Thank you for your photo, may I use this image in my description to demonstrate that it works with 473 cans? Regards Matt

Show original

@user_2615938075

Boosted

Replying to @Matt_XT600 :

Certainly! No problem

Show original

@jdpollock

Boosted

Wasn't sure if this would fit in my mini fridge so I printed and figured I would just toss it if it didn't work, it fit! Great design

The designer has replied

@Matt_XT600

It's a tight fit, but it works. Looks good. Thanks for the photo, the 5-star rating, and the booster. Cheers Matt

@dylanneld

Boosted

Print Profile

0.2mm layer, 2 walls, 20% infill

Awesome. Printed in PLA Basic and still very stable. Fits our Québec 473ml beer cans perfectly.

The profile uploader has replied

@Matt_XT600

Nice to hear. Thanks for the 5 stars, the photo and the booster. Have fun with it, greetings Matt

@CrunchyBourbon

Print Profile

0.2mm layer, 2 walls, 20% infill

Works perfectly 👍🏻

The profile uploader has replied

Show original

@Matt_XT600

Thank you for your 5 stars and the photo. Looks great! Have fun with it and greetings Matt

Show original

@Kayhan660

Print Profile

0.2mm layer, 2 walls, 20% infill

nice print

The profile uploader has replied

@Matt_XT600

Looks good! Thanks for the good rating and sharing the photo. greetings matt

@user_2560055414

Boosted

Print Profile

0.2mm layer, 2 walls, 20% infill

A fantastic print and super easy assembly

The profile uploader has replied

Show original

@Matt_XT600

Thank you for the first pictures from an A1 mini printer, I was very excited to see them The print quality looks excellent I think I will upgrade the 033L dispenser to V3 A1 mini in the next few days Many thanks for the superb five-star rating and the boosts, I always appreciate that And have fun with the design Regards Matt

Show original

@honza1922

The print profile is no longer public

3/4 ok … bed beer ! Radegast geer only! 🤣🤣

The profile uploader has replied

@Matt_XT600

🤣🤣🤣🤣 thanks man.

@deltaromeo

I would love to print your design - looks great! However I would like to use it in my camper van fridge - it is much smaller than a normal fridge. Would it be possible for you to provide a version with only 8 cans of space? Or alternatively provide the files so I can modify it myself? Thanks!

The designer has replied

@Matt_XT600

I'm glad you like my design. It's a shame it doesn't fit in your campervan refrigerator. To shorten it, the design would need to be so heavily modified that it would be better to create a completely new model. Making quick adjustments isn't really feasible. Unfortunately, I don't have any plans to do that in the near future. maybe someday... I'm sorry I can't give you better news. Regards, Matt

@deltaromeo

Replying to @Matt_XT600 :

That's completely understandable - I will have a go at designing my own then.

@Mr.Printer765

can you not just cut the middle chunk out and slap the two sides together?

@user_2773070977

Print Profile

0.2mm layer, 2 walls, 20% infill

The profile uploader has replied

@Matt_XT600

It turned out beautifully, thanks for the photo and your 5 stars. Greetings, Matt

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.