RockShox SID SL - Plug - Free 3D Print Model

Search models, users, collections, and posts

enzymexone

Hobby & DIY>Sport & Outdoors

IP Report

Print Profile(1)

All

A1 mini

P1P

X1 Carbon

H2D

X1E

P1S

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 20% infill

Designer

16 min

1 plate

4.6(9)

Open in Bambu Studio

Boost

114

237

236

165

Released

Description

Boost Me (for free)

If this little chunk of plastic saved your fork’s dignity from mud and misery, give it a BOOST!

Keep the underside of your suspension fork clean and protected with this custom Fork Crown Plug, specifically designed for the RockShox SID SL fork (model FS-SIDS-BSE2-D1). This plug fits into the underside of the fork crown, just above the front tire, sealing off the open cavity to prevent mud, dirt, and water from getting into the steerer tube area.

Key Features:

✅ Protection: Blocks debris and moisture from entering the fork shaft through the underside—especially useful in muddy trail conditions.
✅ Sleek & Discreet: Low-profile (the visible part is only 1,5 mm).
✅ Tool-Free Installation: Quick and easy press-fit with no hardware needed.

Best Materials: PETG or PLA

⚠️ Important Note: This model is tailored for the RockShox SID SL (FS-SIDS-BSE2-D1). Compatibility with other forks has not been tested—fitment may vary. May fit other SID SL or Ultimate forks with 33.5 mm inner diameter— check your fork before printing

Comment & Rating (29)

@user_1178608894

Print Profile

0.2mm layer, 2 walls, 20% infill

75 percent scale works perfectly for the trek marlin 5.

The profile uploader has replied

@enzymexone

Thanks for the 5 stars and the photo! Which fork do you have on your Trek Marlin 5? I’m planning to add fork-specific print profiles shortly. Cheers!

@user_1178608894

Replying to @enzymexone :

I have the SR Suntour XCT 29” forks.

(Edited)

@enzymexone

Replying to @user_1178608894 :

Thanks for the quick reply🙂

@user_1106358543

Print Profile

0.2mm layer, 2 walls, 20% infill

PLA+

The profile uploader has replied

@enzymexone

Thanks for the photo, the plug looks good. Which RS fork is it? Cheers!

@avacaflores

Boosted

Thank you for the design! Note that reducing to 96% is perfect for Rockshox Psylo Silver

The designer has replied

@enzymexone

Perfect, thanks for the feedback! I’ll add an adjusted print profile for the RS Psylo Silver. Cheers!

@user_3676861764

I scaled it to 95% to fit a Rockshox Yari fork. Not sure how tight it needs to be, but 96% might work and fit tighter.

The designer has replied

@enzymexone

Thanks for your feedback! Does it fit tight enough at 95% to stay in place while riding?

@user_2826920758

anyone know if it fits on Rockshox Judy?

The designer has replied

@enzymexone

Thanks for your comment. If you have a caliper, you could measure the inner diameter of your fork. If it’s 33.5 mm, it will fit without any scaling. If the inner diameter is smaller or larger, you can scale the model in the slicer. If you do, please let me know which exact Judy model you have and the inner diameter of your fork. I’ll add print profiles for different RockShox forks soon. Cheers!