IKEA Kallax 10 inch Rack 7U - Free 3D Print Model

Search models, users, collections, and posts

R3MCO

Hobby & DIY>Electronics

IP Report

Print Profile(1)

All

P1S

X1 Carbon

H2D

P1P

X1E

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 15% infill

Designer

5.7 h

1 plate

4.6(5)

Open in Bambu Studio

Boost

164

644

232

Released

Description

This is my very first model, could not find a 10 inch rack for the kallax unit so i designed my own.

A 10 inch rack with 7U space for the IKEA Kallax storage unit.

I've used M6 brass inserts (8mm OD) to use with M6 bolts.

Printed in Bambu Labs PETG HF Gray, no supports needed.

Currently holding a patch panel, switch and raspberry pi without any issues.

(please dont judge my cable management, its a work in progress)

If you have any improvements or questions let me know.

Comment & Rating (28)

@raf.v.hoof

Turned out very nice!

The designer has replied

@R3MCO

looks great!

@gismc123

I tried downloading this and am getting an error that no model file is found. Can you reshare it? also, could you upload an STL file instead?

The designer has replied

@gismc123

ss of error

@R3MCO

That is strange, when i download the 3mf file it opens in bambu lab. I just uploaded 2 STL files. Let me know if it works.

@gismc123

Replying to @R3MCO :

I will test when I get home tonight thank you.

@user_319147376

hey, remixing isn't allowed on this model but i'd like to modify it a bit for my own use. Did you deliberately disabled remixing I totally get it but if not I would really appreciate it if you could allow it :)

The designer has replied

@R3MCO

Yes sure no problem! I changed it, let me know if it works

@user_319147376

Replying to @R3MCO :

it worked, thanks!

@raffael.lima

Boosted

nice idea, I printed the remix from it, but the idea is simply amazing

The designer has replied

@R3MCO

thank you, great that you liked it😁

@Nukepenguin

Print Profile

0.2mm layer, 3 walls, 15% infill

printed perfectly and fits great!

@Druce

Boosted

Cool idea!

@XxGHULxX

what do you do for cooling and ventilation?

The designer has replied

@R3MCO

actually nothing to be honest. its all open in the back and its not getting that warm at all.

@saschahalm

Very good model. Thank you very much! What length are the brass inserts

The designer has replied

Show original

@R3MCO

I used the RX-M6x12.7, the length is 12.7mm

@alferez

Print Profile

0.2mm layer, 3 walls, 15% infill

The idea is good, but printing two of them requires almost 500g of filament While they fit quite well, honestly, unless you can get very inexpensive filament, you might find other options equally or more economical, even if you need to create size adapters

The profile uploader has replied

Show original