Wall Go! - Lid / Cover

Wall Go – Lid / Cover

This is a custom lid designed to fit the board from my Wall Go design. I added a “full cover” and a “slim cover” version. 
You can find the main board game and all components here.

Important Notes on printing:

• The lid was designed with relatively tight tolerances, so please do not use materials prone to warping or shrinking.
• Let the lid fully cool before removing it from the build plate. Removing it too early may cause warping, which can affect the fit. If it warps, you may need to reheat or flatten/sand it to restore proper fit.
• This part is larger than the multicolor area of the P1S/X1C.
  To print it in multicolor, you'll need a Bambu H2D or A1 (untested).
  Alternatively, for single-color printing on a P1S/X1C, take a look at this WIKI and print this FILE to prevent the Filament cutter from interfering with the oversized area.

Let me know how it prints or fits for you – and feel free to add a multicolor print profile for the A1.