Orbiter 1.5 Direct extruder for Prusa MINI Bear

ZOrbiter 1.5 for PrusaMINI Bear

This is the adaptation of the ZOrbiter 1.5 extruder for the Prusa MINI bear conversion. As we were looking for a lightweight extruder this was a very cool option and works pretty well, many thanks to ZARIBO for share this extruder.

Flavors

There are two different flavors

• Delta-P fan which is based on the TEOOKIE Delta-P fan for MK3S+
• Stock fan shroud, which is based on the stock fan shroud for the Prusa MK3S+

IR Sensor integrated

As you suppose the IR Sensor is integrated on the extruder, many thanks to Kim Kyoung Joong for the fs-lever which has been used on this model.

Print settings

We recommend to print it on PETG with 20%-30% of infill for the whole extruder except for the fan shroud which should be printed on ASA/ABS

Profile configuration

You will need to adapt the current for the extruder adding the M907 instruction to your initial G-Code

M907 E320 ; reset extruder motor current

Also we have published the profile on our GitHub