Corner Connector T's (3.6mm) for Spool End

These are my Corner Connectors for thin plywood (3.6mm) for making drawer dividers.  This profile is for the end of a filament spool when you are not sure what else you'll be able to print.  These corner connectors print by object, so when the filament runs out in the middle of printing one connector, you just cancel the rest of the job.  (Unless you feel like loading new filament mid-print). The incomplete corner connectors usually still work.  If you need a plate full of the connectors I have that under another post.  Print this quick profile to finish a spool or just for rating points on MW.  If this model/profile is handy to you, please leave a 5 star rating and a boost!

here are all my models for drawer organization and hanging things on the wall

https://makerworld.com/collections/21177814

here is a collection of my models created to reuse other items:

https://makerworld.com/collections/21223546