Horizontal wall bracket for Beosound Level

Horizontal bracket for Beosound Level

This bracket enables horizontal wall mounting of the Beosound Level, while still allowing easy detachment for portable use

Key features:

• Sound profile - when placed on the original vertical bracket provided by the manufacturer, the speaker will automatically switch to mono sound. On this bracket the sound remains in stereo, which is preferable if you “only” have one.
• Aesthetics - this obviously comes down to personal preference and having this bracket, you now have the option to choose your favourite placement.
• Charging - use the original charging puck to charge while mounted on the wall. 

• User interface - when placed on the horizontal bracket the touch user interface remains on the top of the speaker.

   

Support pads

The two support pads must be mounted below the wall bracket according to the wall template. This is to ensure that the speaker cannot be pushed off the bracket, e.g. if someone accidentally leans on the bottom of the speaker.

The pads are slightly undersized by design to accommodate a felt pad on top, which helps prevent rubbing or buzzing. Let me know if you need a different height.

Each pad includes a side extrusion to hold the original USB-C charging cable in place.

Wall template

A printable wall template is included for accurately positioning the bracket and support pads. Be sure to print at 100% scale—do not resize.

The bracket is designed for mounting with Ø4–4.5 mm countersunk screws.

Print profile

The bracket uses 7 outer walls and 60% gyroid sparse infill—a combination that has proven extremely sturdy through extensive testing. I have no concerns placing my own expensive speaker on it, though I still recommend reading the disclaimer below.

I've used relatively conservative speed settings for this model, as the bracket's shape can cause ringing when printed too fast—at least on my A1 Mini.

Disclaimer

This third-party wall bracket is designed for the Bang & Olufsen Beosound Level but is not affiliated with or endorsed by Bang & Olufsen.

Made from PETG HF filament, it is intended for horizontal indoor wall mounting under normal residential conditions. PETG HF may degrade with heat or UV exposure; ensure your installation location is suitable. Use is at your own risk. The creator is not liable for any damage resulting from installation, use, or misuse.

You are responsible for:

• Ensuring correct and secure installation on a suitable surface
• Using appropriate fixings
• Avoiding excessive heat, sunlight, or humidity
• Verifying product compatibility and safety