Sakura D6 Top Battery Mount
Print Profile(2)
Description
Top battery mount for Sakura D6.
I used Overture Matte PLA when printing this which allows supports to detach easily. You may need to increase the support top Z distance if you have issues removing them.
Printing at a 0.1mm layer height with fuzzy skin gives a nice finish, but have also added a profile without it if you prefer a smooth look.
Fuzzy skin point distance 0.1mm
Fuzzy skin thickness 0.05mm
Super glue needed to attach legs. Be sure to score the surfaces before gluing for the best connection.
I used M3x10mm to attach mount but M3x12mm would be better.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)