Silica gel sieve REMIX

I remixed this fabulous Diseccant Sifter from Phil Caruso with some minor differences so it is more convinient (at least for me)

List of modifications per piece:

1- Base: bigger hole for Good Drawer, taller limit for Bad Drawer, thinner walls on the top half (above the mesh), and angled rails for Shield and Top. (no magnets needed). Requires tree supports on the same spots as in the original, plus another for the angled interior of Good Drawer.

2- Bad Drawer: increased height, different puller. Tree supports recommended for better print quality of the puller.

3- Good Drawer: increased width, added a system of ramps on the interior walls so you can rotate it and pour the good silica gel balls into your prefered container by the added tube on the upper front side. Also different puller. Requieres to be printed in the same position and with the same tree supports as in the printing profile provided.

4- Mesh: no changes, both of the original mesh sizes can be used here.

5- Shield: angled rails for attaching to the Base instead of using magnets

6- Top: angled rails for attaching to the Base instead of using magnets

Visit my profile to discover more awesome and useful prints! 

I really do appreciate likes, downloads, comments, good ratings and specially boosts!