Glass Dagger - Oblivion Remastered inspired

Cosplay prop dagger inspired by the “Glass Dagger” from the Oblivion Remastered Edition. 

Print / Assembly instruction:

The scabbard is optional, but if you want both, you can print it together with the dagger itself.

The scabbard comes with two top parts, one with a belt holder for cosplaying.

Printing is pretty straight forward and it only needs minor supports. Watch out for the blade, since it's rather tall and can tip over when printing it on a bed slinger.

When you print the glass-parts with a transparent filament, like I did, disable infill on those parts for a cleaner look.

If you have trouble fitting the pin inside the blade/hilt, either print it 5% smaller or heat it up a bit with a lighter so it molds in place.

Assembly of dagger:

Assembly of scabbard:

I hope you have fun with this :)

⚠️ This is a fan-made model and is not affiliated with any brand, character, or license holder.

Commercial License available at the joint Patreon of @Kariprints3D and Me here: https://www.patreon.com/c/kariprints3d

Disclaimer:

Some models are fan art inspired by existing copyrighted works. You may only sell physical prints of these models if you have permission from the original copyright holder.