PP Extension Philips Avent Baby Bottle Sterilizer - Free 3D Print Model

Search models, users, collections, and posts

sp33dygtx

3D Printer>3D Printer Accessories

IP Report

Print Profile(1)

All

P1S

H2D

X1E

P1P

X1 Carbon

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 6 walls, 25% infill

Designer

10.5 h

1 plate

Open in Bambu Studio

Boost

Released

Description

WARNING: This must be printed with PP

I scanned with Tencent Hunyuan3D

The top part and made an extension for big bootles for the Phipips Avent. I dosen't look perfect but does the job.

This must be printed with PP.

I used fiberlogy pp
stick Scotch tape on the bed
I used a very slow profile to make sure i don't get warping as the first 2 attempts I had
Used very solid brim to make sure it sticks well
fuse the parts together after cleaning with soldering iron

Comment & Rating (3)

@erniediy

will printing in ASA work? with the high temp if steaming and drying?

The designer has replied

@user_1700601759

going to try a test run with some PETG... I don't have high hopes but I suspect that specific area might not actually get to the 212F temps... also, you can tip over the larger dr browns bottles, it can only fit a few in this thing... but would love to get an extension

@sp33dygtx

only PP is food safe and I sterilized a petg toy that bent so I assume it will also as petg starts to transition around 70 c not sure about asa: ASA releases styrene fumes during printing

(Edited)

No more