Baby Pacifier case - Free 3D Print Model

Search models, users, collections, and posts

VwFix

Household>Other House Models

IP Report

Print Profile(1)

All

P1S

H2D

P1P

A1 mini

X1 Carbon

X1E

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill, fuzzy skin

Designer

1.4 h

1 plate

4.5(8)

Open in Bambu Studio

Boost

102

265

240

193

Released

Description

A simple baby pacifier case with an easy to use twist lock. The case also has a small loop on the base to attach the case to backpack or diaper bag.

The profile for the print has fuzzy skin enabled for the top part, but if you are not a fan just disable fuzzy skin before printing.

If you like this print check out my other designs!

Comment & Rating (9)

@Scynthius

Print Profile

0.2mm layer, 2 walls, 15% infill, fuzzy skin

very nice, works very well, the overhang on the inside of the top piece (where the bottom clips in) had a couple loose stringy layers, just peeled them off it and works great, fits the pacifier, closes well, stays closed, wife is happy

@snailRider0

Print Profile

0.2mm layer, 2 walls, 15% infill, fuzzy skin

Could be improved by marking the direction of opening and closing with some tactile surface marking. A bit hard to open/close in dark.

@ghurhu

Printed on a FlashForge AD5X - so i will not comment on the profile, although based on older comments - i see people have issue on the Bambu printers as well... Maybe i'll once try it on the P1S - but for now - please just tell me that i am not the only one that feels like the locking mechanism goes in the "wrong" direction... Not sure what the plan was - but it will definitely confuse paci thieves :D :P

@user_20829658

Print Profile

0.2mm layer, 2 walls, 15% infill, fuzzy skin

@whatupyo

Print Profile

0.2mm layer, 2 walls, 15% infill, fuzzy skin

@user_2324785060

Print Profile

0.2mm layer, 2 walls, 15% infill, fuzzy skin

@user_625826746

Print Profile

0.2mm layer, 2 walls, 15% infill, fuzzy skin

@user_1347479661

Print Profile

0.2mm layer, 2 walls, 15% infill, fuzzy skin

@alex.radut

Print Profile

0.2mm layer, 2 walls, 15% infill, fuzzy skin

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.