Face in the wall
Flat hueforged art
If you like my work you can always boost my profiles or just rate them, thank you for everything
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Beige Transmission Distance: 8
PLA PolyLite White Transmission Distance: 5
PLA Default White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Beige
At layer #14 (1.2mm) swap to White
At layer #15 (1.28mm) swap to White for the rest.