Apollo Master Alarm Panel - With Text

This is a remix of the excellent base model by KitchenKid, adjusting for an AMS and including the missing text to give a more complete “out the box” print. If you do not have an AMS, then the original file is a better choice, albeit I would suggest changing it from 100% infill to 15-20% for the backplate (but not the guards).  

In addition to adding the text, I also split the back plate allowing printing with no supports, but face down for the front plate. I suggest printing this on a smooth plate. The original front mounting screws, which were just for show, now connect the 2 parts together. 

Hardware requirements remain as per the original design. 

• 11x 6-32x.5" phillips head screws 
• 16x 2-56x.5 phillips flat head screws
• 03x 12mm SPST toggle switches
• 03x 12mm SPDT (on-off-on) toggle switches 
• 06x RED toggle switch boots with ends cut off
• 01x Momentary Rect. Button