Yi Cam AMS Riser V2/V4 Mount for P1S / P1P / X1C

The camera is too slow to update on the P1S so I wanted a way of mounting a spare Yi Camera I had.  I didn't like the designs that attached to the door or sat on the top of the glass.  I wanted a more discreet look so spent some time designing this. 

It is a replacement inset for the side of the AMS riser V2 which incorporates a mount for the Yi Cam.  I took my A1 yi cam design, modded it a bit and attached it to the hexagon side insert from the AMS Riser V2 from maCyo42.  Also works with the BLV Riser V4 

It's quite hard to see from the images but it is low enough to clear the glass if you move the glass to the shelf of the AMS Riser. It also clears the TPU gasket if you are using that.

I've added 2 versions, one for the left side insert and one for the right side insert (when looking at your printer from the front).  

Left side view:

Right side view:

If you have an A1 or A1 mini I have a mount for the same camera here

The usb cable clips can be found here