Ams Riser for X1C / P1P / P1S Remixed by FelixMakerWorld: Download Free 3D Models

Remixed by

Felix

3D Printer>3D Printer Parts

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

0.2mm layer, 4 walls, 25% infill

Designer

71.4 h

9 plates

4.7(35)

Open in Bambu Studio

Boost

501

1119

203

1.7 k

300

Released

Description

Takes 3 Days to print and with 2 kg of petg hf

With Petg it holds up steady and doesn't wobble.

Boost Me (for free)

Plsssss

ams

riser

Comment & Rating (82)

@MainDawg

Considering this guy slightly alters a design, makes it his, then refuses to update his post on errors people came across or instructions for that matter.... here is some things to note: - Will not work on a P1P - Riser does tend to slide on the unit when printing, you may need double sided tape. - No instructions... for longevity I assembled piece by piece using CA/Super glue as indicated by the numbers. Luckily I caught myself on number 3 and had to physically break it and force in with 4 in order to make it work. If I had glued beforehand, I would have been 100% screwed and would need to restart 40+ hours of prints. - The holes you see in it are not for bolts, but instead for the TPU pieces, so dont see them in the G-Code and wonder why it doesnt align with holes on your printer. - The TPU pieces are basically required otherwise the print is not very flush and has almost 0 surface contact. - Lastly, expect at least a 50% mass increase due to supports and such. They need them.

(Edited)

@SCGT98

Is the original one better?

@HopHopper

I'd like to know too... I'm leaning towards the original one even though this looks better to me. the og has a lateral piece which would improve stability. I might print the side panels from this one though if they fit into the original one

@MainDawg

Replying to @HopHopper :

Somehow I got blocked from this listing and am only able to see it again because of your response. I never got to print the feet so I ended up having to trash the entire thing. There is a new one online that someone did with massive revisions and is 10x more worth it than this one.

@meltaka96

This model does not seat on the P1P properly.... Waist of Time & PETG.

(Edited)

The designer has replied

@lixi270210

sorry maybe you could print something so it fits ?

@Herefishy

well you saved me a lot of time and money thank you.

@thumpernator1

I've found that most risers advertised for the P1P are just like this. Pictures always shows them on a P1S which has the sides to keep the riser from slipping off and the filler needed like in your photo. I've wasted a LOT of filament to find this out.

@SIRIUSTUNING3D

Print Profile

0.2mm layer, 4 walls, 25% infill

Perfect finish

Show original

@user_3197306162

This looks like the same color I used for my accent pieces - is this Burnt Titanium? Looks great!

@SIRIUSTUNING3D

Replying to @user_3197306162 :

yes. is burnt titanium. 🤙🏻🤙🏻

@TK20680

overall nice look but my issues were the infill on the front lower part kept switching between colours so removed all to make plain black which fixed that issu, the rear colour panels dont fit and the 3rd part auto supports are so dense it took a knife and some serious hammering with a screw driver to remove, fits the P1S perfectly and a great addition to the machine, im still new to 3d printing so with a bit of practice i may learn to fix my issues

(Edited)

The designer has replied

@lixi270210

Ok thanks to know and good luck with 3D printing

@user_1616395991

Boosted

Print Profile

0.2mm layer, 4 walls, 25% infill

printed the first 2 and they are crazy good quality and design

@Mgaust22

Print Profile

0.2mm layer, 4 walls, 25% infill

lov it

@user_3310781407

Boosted

Print Profile

0.2mm layer, 4 walls, 25% infill

Great model! easy to print

@jibunajr

Boosted

Print Profile

0.2mm layer, 4 walls, 25% infill

perfect! thanks!

@Steven_3D_ITA

Print Profile

0.2mm layer, 4 walls, 25% infill

top

@Taomon

Print Profile

0.2mm layer, 4 walls, 25% infill

Does not fit p1s, wasted a lot of filament to find that out.

@DadyDaughtrThgs

it shows it on a p1s. what didn't fit properly?

@Taomon

Replying to @DadyDaughtrThgs :

The front part does not fit on the p1s, when its assembled the entire bottom of it is flat when the front has to have a notch to fit on the extra small pannel that is on top of the p1s where the sd card is also located.