Bambu A1 Mini Z-axis Topper
Copyright Claim
Bambu A1 Mini Z-axis Topper
Boost
12
19
9
Print Profile(3)
0.2mm layer, 2 walls, 15% infill - Angled Notch
Designer
1.1 h
1 plate
0.2mm layer, 2 walls, 15% infill - No Notch
Designer
1.1 h
1 plate
0.2mm layer, 2 walls, 15% infill _ With Notch
1.1 h
1 plate
Open in Bambu Studio
Boost
12
19
9
4
70
56
Released
Description
Bambu A1 mini Z-axis topper to prevent cable/filament tube from snagging on the top of the Z-axis. I cut out a small piece on the front to clear the nub sticking out on the front (see photo). With this removed, the cap fits snugly. I may update this once I modify the design to incorporate this.
Update (June 12, 2024): I have uploaded a modified version with angled notch to better fit. I hadn't noticed others already modified the original before I did the same, but here it is anyway. The notch has an angle designed into it to more snugly fit.
Feel free to modify as needed.
Comment & Rating (9)
All
Printed nicely, I made a remix to include the notch for you. Thank you for the model!
The designer has replied
1
Reply
Very nice!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill _ With Notch
Easy print. Perfect fit.
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill _ With Notch
A nice functional little hat for our A1 Minis.
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill _ With Notch
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill - Angled Notch
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill - No Notch
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill _ With Notch
(Edited)
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill _ With Notch
0
Reply
No more
© 2024 MakerWorld