DAVID HOLECKO

cover

Messenger_creation_46F4E715-1F9D-4ADE-9C3D-80045BAB39E1.jpeg

Messenger_creation_434F36FF-76EA-4DE0-8FAD-9882FBD022ED.jpeg

20250403_121623-Photoroom.jpg

plate_1.png

20250403_121623-Photoroom (1).jpg

LEFT - 0.2mm layer, 4 walls, 25% infill 

RIGHT - 0.2mm layer, 4 walls, 25% infill

Right end

Left end

plate_2.png

Jackolas

20250926_113355.jpg

The original print profile is extremely sturdy, and had speeds lowered for better quality. For my purposes, this was overkill. I did not need the model to be so dense, and I felt like I could improve the speed without quality loss. Both bookends are present in this profile.&nbsp;Main differences:<ul><li>.28 layer height vs original .2</li><li>2 walls vs the original 4</li><li>reverted infill density to default 15% vs original 25%</li><li>reverted print speeds to stock default</li></ul>This results in<ul><li>material usage reduction from the original 218g to 142.25g</li><li>print time reduction from 5.5+ hours to 2.75 hours</li></ul>I have printed both the original profile and my profile, and they are both holding up great. I recommend the textured plate for aesthetics, and to turn your aux fan off for better adhesion.

Better efficiency, 0.28mm layer, 2 walls, 15% infill

Simple yet sturdy book stopper, prints perfectly on the side.&nbsp;&nbsp;<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Thank you for your support</boostcontent></boostme>

flowers Book Ends 

ASIA

Print Profile(3)

Description

Comment & Rating (112)

License

Related Models