altair3d

cover

plate_1.png

plate_1.webp

This prints two at a time. I like 3 walls and 20% infill.

0.2mm layer, 3 walls, 20% infill

plate_2.png

PXL_20231023_161716444.webp

This profile has two plates, one for a single bookend, and one that has two bookends. I prefer quality over speed. WIth that, I always print with 3 walls. That tends to make cleaner outside surfaces and stronger parts.

0.2mm layer, 3 walls, 15% infill

TinyMakerSpace

Book End.webp

plate_1.png;filename*=utf-8''plate_1.webp

I reduced top/bottom layers and made the brim settings more aggressive to reduce the warpage I saw with OPs profile. Everthing came out perfectly.

Steven

20251029_012156671_iOS.jpg

Fixed the orientation and made them only 75 mm wide (height in Z). I just needed them done quickly Fixed bed orientation as well. &nbsp;

FAST 0.24mm layer, 3 walls, 20% infill reduced Z height 

These are simple book ends. My wife was need some while organizing her book shelf, so I sketched some up.

Print Profile(4)

Description

Comment & Rating (228)

License

Related Models

Simple Book Ends

Print Profile(4)

Description

Comment & Rating (228)

License

Related Models