Raspberry Pi Zero 2W Arc Reactor Case - Free 3D Print Model

Search models, users, collections, and posts

azi3dprint

Hobby & DIY>Electronics

IP Report

Print Profile(2)

All

X1 Carbon

A1 mini

P1P

H2D

P1S

X1E

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.12mm layer, 2 walls, 20% infill

Designer

1.2 h

1 plate

3.0(2)

0.12mm layer, 2 walls, 20% infill

Designer

1.1 h

1 plate

Open in Bambu Studio

Boost

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

M2x12 FHCS Machine Screw (20PCS) - AA015

M2 Stainless Steel Flat Head Cap Machine Screws (FHCS)

Round Threaded Brass Heat-Insert Nut

Bambu Filaments

Select all

PLA Basic

Description

The design is inspired by the iconic Arc Reactor, giving the Raspberry Pi Zero 2W a sleek and unique appearance. The case not only protects the board but also adds a visually appealing element to your setup.

There are two available configurations, each with a different bottom cover: Set 1 and Set 2.

(Set 1 ) Model\print profile files:
- 3MF: AZI_RasPi_Z2W_Arc_Reactor_rev1_both_parts-set1.3mf
- STL: AZI_RasPi_Z2W_Arc_Reactor_rev1_top.stl (the same between both sets) and AZI_RasPi_Z2W_Arc_Reactor_rev1_bottom_type1.stl

(Set 2) Model\print profile files:
- 3MF: AZI_RasPi_Z2W_Arc_Reactor_rev1_both_parts-set2.3mf
- STL: AZI_RasPi_Z2W_Arc_Reactor_rev1_top.stl (the same between both sets) and AZI_RasPi_Z2W_Arc_Reactor_rev1_bottom_type2.stl

Additional:

4x Screw: M2x12
4x Round Threaded Brass Heat-Insert Nut: M2x3.5x4 or M2x3.5x3

raspberry pi zero 2 compact case

raspberry pi zero 2 w

raspberry pi zero 2 mini case

raspberrypizero2w

raspberrypizero

raspberry pi zero 2 cover

Comment & Rating (4)

@A8i7M4X2020

Boosted

Print Profile

0.12mm layer, 2 walls, 20% infill

Does exactly what it says on the tin

The profile uploader has replied

@azi3dprint

Thank you very much :)

@user_4055877567

Print Profile

0.12mm layer, 2 walls, 20% infill

Missing Model Parts:bad

Other Issues:dad

The profile uploader has replied

Show original

@azi3dprint

Thank you for your feedback. However, I have to say that it is quite vague, and I’m not sure how to act on it. Feedback like this is not very helpful, as the lack of details or explanation makes it difficult to identify and resolve any potential issues. If there is a problem with the model, I would appreciate the opportunity to address and fix it. You mentioned a missing part, but all parts for this model are included—either as a 3MF file or as individual STL files—along with some explanation in the description. Could you please clarify exactly which part you found to be missing?

No more