Dyson V11 & V15 Filter Cleaning Adapter

This adapter facilitates effortless and thorough cleaning of your Dyson V11 or Dyson V15 dust filter. Unlike other solutions, this adapter’s inverted design directs wastewater downwards, preventing it from entering or saturating the paper filter.

Advantages:

• Simplified cleaning of the Dyson V11 or V15 filter
• Innovative design enabling wastewater drainage
• Prevents water ingress into the paper filter
• Secure fit thanks to a precise connection (for faucets with a 23.80 mm diameter)

Instructions for Use:

1. Insert the adapter into the filter.
2. Attach the adapter to the faucet.
3. Gently press the filter downwards to ensure a tight seal with the rubber gasket.
4. Slowly turn on the water, gradually increasing the water pressure as needed.
5. Carefully rub and press the filter surface to enhance cleaning.
6. Turn off the water and allow any residual water to drain completely.
7. Detach the adapter from the faucet.
8. Separate the adapter from the filter.
9. Allow the filter to dry completely for at least 24 hours.
10. Wipe the adapter dry.

Note and Update (05/23/2025):
The connection is designed for a standard faucet with a diameter of 23.80 mm, ensuring a secure and firm fit.

If your faucet is slightly larger, I have uploaded two additional print profiles with a slightly larger inner diameter (24.30 mm and 24.80 mm).
I have also released a special size: inner diameter 28.15 mm