2 Piece 40mm to 60mm Fan Connector
Print Profile(1)
Description
FOLLOW me for new updates and models - https://makerworld.com/en/@menerso
Check out my other Bitaxe models here - https://makerworld.com/en/collections/5419271-mining-accessories
This model allows you to put a 60mm fan onto a 40mm heatsink. I use it for my Bitaxe, but could be used for anything with a 60 to 40mm fan.
Other models are a single piece which needs support and can be hard to get the screws into. I made this to be able to mount the base to the heatsink and then, with friction fit, mount the shroud with the fan. Works great. You could put a drop of super glue on but then you run into issues if you want to remove it later. Up to you, but the friction fit is tight.
In my case I used the 5V Noctura NF-A6x25 PWM 60x25mm fan.
Boost Me (for free)
Hoping to get enough points to pay for a Bambu H2D or the new H2C. It is FREE and it really helps me out. Thank You!!
Membership
Want to support me with a small monthly tip or open a commercial license to sell some of my prints?
Check out my other models and Collections. Why not give me a FOLLOW since you are there.
I post new models and updates to models frequently.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (9)