Pyelitis

cover

bottom part.JPG

bottom and top.JPG

middle part.JPG

all three parts.JPG

plate_1.png

0.4mm nozzlePLA.2mm Standard Layer hightsupports active just to be sure, and manualy set for the micro-usb hole.

0.2mm layer, 2 walls, 15% infill

just the middle part, and the cover with the cableout.

I needed a case for my arduino leonardo, so I designed one. <ul><li>bottom part for the arduino leonardo</li><li>middle part for some extra space RTC, SD-Card. With access to all pins on the board below</li><li>2x top cover, one with a little space for cables to go outside.</li></ul>&nbsp;

Arduino Leonardo Case

Remi Kakuzatou

20260617_221544.jpg

20260617_220830.jpg

20260617_220842.jpg

20260617_220825.jpg

ASIA

Print Profile(2)

Description

Comment & Rating (13)

License

Remixes (1)

Related Models