Crystalline Dragon X-tra long - 60cm on A1 mini! - Free 3D Print Model

Search models, users, collections, and posts

Insectium3D

Toys & Games>Other Toys & Games

IP Report

Print Profile(2)

All

A1 mini

X1 Carbon

P1S

X1E

H2D

P1P

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 10% infill

Designer

7.1 h

1 plate

4.8(85)

0.2mm layer, 2 walls, 10% infill

Designer

13.3 h

1 plate

5.0(12)

Open in Bambu Studio

Boost

623

1344

133

111

1.7 k

836

Released

Description

Crystalline Dragon X-tra long - 60cm that fits on A1 MINI & 100% print in place.

Easy to print, with a structure for none post-processing

Want me to upload more free designs? Give it a boost then!

Membership

Want to sell this design or any others I've created? Join the Commercial License tier! 🤩

Join

Easy and quick to print: Ready to print directly, with no adjustments or assembly needed afterward.
100% scale fits on A1 MINI!
No post-processing required: Just hit "print" and enjoy your finished model immediately.
100% is a total length of 600mm(!), the model can be scaled down to 80%, smaller joints may become fragile/weak.
Scaling the model up is no problem!

Pre. painted versions included.
Let me know if you need any further adjustments!

Like the design?

Show it some love and give it a boost!

Boost Me (for free)

Want me to upload more free designs?
Give it a boost then! Your support means a lot!

Check out my other designs, including dragons, reptiles, mini's and more here!

Recommended printing settings:

Wall: 2-3
Layer Height: 0.2 mm
Infill: 5-15% gyroid or similar infill
Support: Not needed
Brim: Use 5mm mouse-ear if needed

Let me know if you need any further adjustments!

Have fun printing and don't forget to share your prints!!

Like the design?

Show it some love and give it a boost!

Boost Me (for free)

Want me to upload more free designs? Give it a boost then! Your support means a lot!

Check out my other designs, including dragons, stingrays, and more here!

Recommended printing settings:

Wall: 3
Layer Height: 0.2 mm
Infill: 5-15% gyroid or similar infill
Support: Not needed
Brim: Use 5mm mouse-ear if needed

dragon print in place

print in place dragon

articulated 3d figures

print in place animal

print-in-place dragon

Comment & Rating (133)

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.