Mini Catmaw - CyberBrick Edition
Print Profile(2)
Bill of Materials
Description
Mini Catmaw - CyberBrick Edition
This is a remote controlled car using the CyberBrick eco system. Most parts are printable except for the electronic, screw and springs. The Mini Catmaw is powered by two N20 400rpm motors in the rear axle. It features a fully working rear and front suspension. And incorporates controllable front and rear lights. Car is designed to be quite modular and with user moddability in mind. It uses the CyberBrick Official Standard Remote which is also compatible with many other published models.
Note! In the BOM below there are some components listed that are already part of the CyberBrick Beginners Hardware Kit (ZK004), The kit contains too few of these items. E.g. the RGB leds and hubs, the kit contains 4 leds but 8 are needed, so those extra needed leds are listed in the BOM. So if you already own the Beginners Hardware Kit you can simply uncheck the Beginners Kit from the BOM and buy the rest of the components only.
Note! If you notice that the steering servo is really slow to turn you might need to update the firmware in the controller boards (when it becomes available) as the current version has an issue.
Updates
23.08.2025
- Rear axle has been reinforced as it was breaking for some. The front bumper has also been reinforced some. But if it the bumper still breaks in crashes you can also print it out of TPU, then it will survive almost anything.
Assembly Guide
An detailed assembly guide can be found via the link below, please check this before starting the project: https://docs.google.com/presentation/d/1c5Smlzh64unvUZIwc8qQjgEzqWMHxs4AjgcsNiz0ym4/edit?usp=sharing
Features
Working suspension
- Independent front suspensions using torsion springs. Stiffness can be adjusted by swapping the springs to softer/harder springs.
4 link rear suspension with printable shock absorbers (except for the 8x20mm spring)
Functional Independent front suspension using torsion springs integrated in the A-Arms 
Functional 4 link rear suspension using printed shock absorbers 
Chassis suspension The printed rear shock absorbers can be replaced with aftermarket shocks, e.g. 1:18 scale TRX4M shocks fits nicely
Supports both printed shocks and aftermarket shocks 
Printed wheels with printed shock absorbers 
Aftermarket shock absorbers and aftermarket wheels
Rear wheel drive
- Powered by 2x N20 400rpm motors that are integrated in the rear axle.
For more power you can swap out the rear axle to a different axle that fits larger more powerful N30 motors
2x N20 motors integrated into the rear axle 
Works with both N20 and the bigger N30 motors
Wheel customization
- 3 wheel options:
- Fully printed rims and TPU tires
- For better grip you can print 1" bead lock tires and put on real rc rubber tires
Use aftermarket wheel/tires, there is a printable wheel adapter with which you can fit any aftermarket tire with 7mm hex hub.
Fully printed TPU wheels 
Printed rims with rubber tires 
Atermarket wheels with printed adapter
Led lighting
Controllable front and rear led lighting
Removable rear hatch to reach the on/off button and battery
Remote Controller Mapping
Boost Me (for free)
Please consider a boost if you like this model, this will help/motivate me to make more content. Any help will be appreciated!
Documentation (1)
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (294)